| 
  • If you are citizen of an European Union member nation, you may not use this service unless you are at least 16 years old.

  • You already know Dokkio is an AI-powered assistant to organize & manage your digital files & messages. Very soon, Dokkio will support Outlook as well as One Drive. Check it out today!

View
 

Speakers

This version was saved 12 years, 11 months ago View current version     Page history
Saved by Omer Asmat
on April 21, 2011 at 7:55:57 am
 

Wiki Question.doc Speakers

 

 

 

Table of contents:

  1. History

          1.1 Invention of the first Loudspeaker

          1.2 Further Improvements    

     2. What is a loudspeaker?

     3. Design

     4. Physics

     5. Resources

 

 

History

Invention of the first Loudspeaker:

 

In 1867, Alexander Graham Bell constructed the first ever electrical speaker device for the purpose of building a telephone. In 1877, Ernst Siemens improved upon Bell's invention and invented a more advanced electrical loudspeaker. During the period of 1867 to 1891, physicists such as Nikola Tesla  were working upon improving this idea of the loudspeaker. The research of these three physicists 'sparked' the development of the modern-era loudspeaker.

 

 

Alexander Graham Bell,  Nikola Tesla and Ernst Siemens (left to right) were key individuals who contributed to the development of the modern speaker.

 

Further Improvements:

In 1898, Horace Short used the design of the loudspeaker which was driven through compressed air. These designs however proved to have flaws such as poor sound quality and inability to produce sounds at a low volume. At this time, other scientists such as Oliver Lodge were experimenting with the modern design of moving coil.

 

What is a loudspeaker?

 

Brief Description:

A loudspeaker is a device which converts electricity into sound which is amplified through a device. Commonly used loudspeakers are radios and stereo systems. There are many different types of loudspeakers and they all are different in terms of producing sound frequency. A loudspeaker can also be referred to transducer which means that it converts a certain type of energy into another. In this case a loudspeaker converts electrical energy into sound energy.

 

A typical stereo system.Wiki Question.doc

 

Design

 

 

Physics

 

Many common types of drivers today are made from lightweight diaphragm, or cone which is then connected to a rigid basket type frame. Basically an electric signal is applied to the voice coil, in which a magnetic field is created by running current through it. A mechanical force is generated by the interaction of the coil and the driver's mechanical system causing the coil to move back and forth, thereby reproducing sound. The field around the coil begins to act like a magnetic field in a permanent magnet, thus it has a polar orientation, in simple terms a North and South end. However, the orientations are able to be altered. If the flow of the current is reversed, the north and south ends of the magnet switch. The amplifier constantly switches the electrical signal, causing the fluctuation between a negative and positive charge in the red wire. An electron always flow the same way between negatively charged particles and positively charged particles, the current goes through the speaker one way, but then switches directions and flows the other way. This alternating current causes the polar orientation of the electromagnet to alternate many times in a second.

 

Resources

 

http://electronics.howstuffworks.com/speaker5.htm 

http://en.wikipedia.org/wiki/Loudspeaker 

 

 

Comments (0)

You don't have permission to comment on this page.